How to Install Security Screen Doors | Securelux

A skilled do-it-yourselfer can install a security screen door. You can do this project yourself, but you will need help of security screen installers putting the security door in. For the door to fit perfectly, many fiddly steps need to be done right, so be ready to take on an advanced project. Even the strongest security door won't keep people safe if it isn't correctly attached to the door frame.

Step 1: Get your tools and supplies together

Select a security door with pre-mounted hinges for streamlined installation. Choose a curtain based on the size of the door it will cover. When you buy a door, it should come with all the mounting hardware you need. Check the instructions from the maker to make sure you have all th
e tools and parts you need for your project. Because models are different, follow the instructions and diagrams in the user guide from the manufacturer. Set out all the tools and parts for installation so that you can find them easily.

Step 2: Measure the hole and cut the Z-bar to fit

Take a measurement from the top of the door's inner frame (the header) to the bottom of the door's inner border to get the overall height of the triple locked security doors opening (the threshold). The Z bar has a door that can be attached to the metal screen door. During the installation, you should wear safety glasses and gloves. Hacksaw the Z bar to size so it can pass through the opening. First, reduce the length of the Z bar by 3/16 inch, or just enough to fit within the door frame.

Step 3: Put the security screen door in place

• To fix the door to the brick moulding:
• Use a power drill.
• Please use the screws provided by the manufacturer.
• You need to drive these screws into the hinge holes, through the Z bar, and into the moulding.
• Make sure the door is hanging straight by opening and closing it.

Step 4: Put the header in place

Put the header piece on top of the triple locked security doors made of metal. Find the holes already cut in the header to figure out where to put the screws. Match the size of the blade on your screwdriver to the size of the screws that came with the kit. Put the header in place with the screwdriver.

Step 5: Put the Expander in place

Open the door. The security screen door can be expanded by sliding the adjusting piece along its base. An expander strip prevents debris and dirt from collecting in that space. A power drill is required to secure the expander's screws. Make sure the expander will fit through the door after you open and close it again. After the expander has been put in correctly, the installation is done.

    Conclusion

If these steps look hard and complicated, it might be better to call a professional security screen installers.